|
|
|
Inflatable toy instructions
| Author：inflatable tents Date：2011-8-4 9:11:35 |
First, the installation of inflatable slides:
1, place the device flat on the ground, following the best equipment to put a mattress (such as carpet, plastic color of the cloth), and then expand it.
2, to find the device into the outlet, then connect with the fan outlet and the fan port truss, and then back into the air with a rope fastened.
3, the blower power, a device will muster in 5-10 minutes.
Second, the complete installation of the fan:
1, selection GB 1.5mm2-4 mm2 cable with the fan connected to several meters, connect the other end of the air switch, and connected to the electric shock protection.
2, used and should be preceded by checking whether the plate supply voltage line, the direction of rotation is correct.
3, should take a reliable chassis ground, and regularly check the fan inlet at the fence, in order to avoid accidents.
Third, equipment cleaning collection:
1, power off, open interfaces and exhaust fans, exhaust time is generally 10-25 minutes, residual gas to be squeezed. If the device because of the rain water, be sure to drain the water and air.
2, To do cleaning, use detergent to the stain, wipe off the grease, and then cleaned with water, sun to dry.
3, folding device, with the bottom of the front stopped, and then tarpaulin to cover.
4, If the long-term need to clean equipment, folding, bundling, packaging. Storage temperature is -50 to +40 degrees Celsius appropriate. 5, fans should pay attention to moisture and corrosion. Inflatable equipment to pay attention to rodent infestation bite.
Fourth, maintenance of way:
1 To ensure your equipment up to a normal life, can not participate in the power play too many children play. Generally die in the gas hold three square meters a child.
2 facilities from small decorative shapes, can not let the children dead lift, hard to tear so as to avoid damage.
3 children play, not a hard thing to let your child doodle on the device to avoid damage.
4. In case of equipment damage, and breakage in the back of the PVC materials are coated with special glue, wait 5 minutes after the sticky glue, to glue the appropriate extrusion, a few minutes you can use.
5 devices pressure is too soft, not too much leakage check, tear holes, or power failure; pressure is too hard, should block the fan air inlet point.
6, such as a large area of non-normal damage, the factory can provide professional maintenance services, or simply return the factory for repair.
Fifth, a warning:
1. Prohibited young children (3-6) play thrilling project.
2 young children and older children at the same time to avoid a play, in order to avoid a collision.
3 management staff to arrange everything according to the rules of the game play for children's play, in order to avoid any eventuality.
4. In case of strong winds (four or more) rain, snow, fog, hail and other weather equipment is prohibited in the outdoor inflatable bouncers open-air use to avoid accidents. Inflatable tents for use and maintenance
|
|
